For complete technical information, download the datasheet here:

Full Spec Sheet, PDF


 
 

System Navigator for CAST8051
System Navigator tools for
CAST 8051 Synthesizable Microcontroller Cores

The System Navigator is designed to support the special features and integrated peripherals of the CAST 8051 cores. Special "silicon hooks" for System-on-Chip development have been integrated into the synthesizable IP model for the core. These On-Chip Instrumentation (OCI™) extensions allow FS2 to provide a powerful debug tool with advanced features at a competitive price. To visit the CAST web site and learn more about the various cores click here >>>.

The System Navigator SNAV-CAST51 probe hardware is contained in a compact chassis that connects to the target system using a standard 10 pin debug connector. It requires access to only 4 pins in the core processor. The system runs on a Windows® 2000/XP PC over an USB 2.0 or optional 10/100 Ethernet port. A graphical, source level debugger program provides an intuitive, easy to use interface. An optional Keil µVision3 software debugger interface is also available for complete compatibility with the Keil software tool chain.

Key Features
 • Supports the CAST R8051XC, R80515, R8051, C8051 cores
• Go, halt processor run control
• Supports bank switching
• Read-write all processor registers, SFRs, program memory and data memory
• Unlimited software breakpoints
• Hardware execution breakpoints
• Load binary, Hex or OMF51 file formats
• Complex triggers monitor address and data for code memory, data memory and SFRs
• Low-level access to JTAG functions for silicon verification
• Single line assembler/disassembler
• Trace window display of assembly, source, or mixed assembly/source
• Symbolic debug including code, variables, and variable types
• Symbol Explorer provides hierarchical tree view of all symbols (modules, functions, blocks, variables, and more)
• Source window can display C, assembly, and mixed source code
• Source window provides execution control: go; halt; goto cursor; step over/into call
• Set or clear software or hardware breakpoints in source window
• Select global or local variables for watch window from the source window
• Trigger window allows triggers to be set on a combination of address, data, and bus cycles
• Triggers can be set on an address range and/or data with masking bits
• Optional interface for Keil µVision2 software debugger
• Supports software tools from Keil, IAR and other vendors
 
home | about | shop | contact | news & articles | products & services | support & downloads | terms of use | privacy policy

FS2 is a division of MIPS Technologies, Inc. © 2007 MIPS Technologies, Inc.
FS2, the FS2 First Silicon Solutions logo, FS2 Navigator, Bus Navigator, Logic Navigator, System Navigator, Clam, FPGAView, HyperDebug, HyperJTAG, MED,
and OCI are trademarks or registered trademarks of MIPS Technologies, Inc. in the United States and other countries.